It’s about to get hot in here…as you’ve just discovered the beastly fire breathing reptile, Draccus, with it’s long smooth and greatly tapered shaft.
Small Girth at head: 5” Largest diameter at head: 1.47” Girth at stalk: 7” Largest diameter at stalk: 2.42” Total height: 7” Usable length: 6.25” Weight: 14oz Medium Girth at head: 6” Largest diameter at head: 1.80” Girth at stalk: 9.75” Largest diameter at stalk: 3.02” Total height: 8.5” Usable length: 7.5” Weight: 24oz
colours are poured together and will intermix in the model. A 'fast' marble can create less blending of the colours, whereas a 'slow' marble will have the colours mix and blend quite a bit.
colours are poured in a layering swirl, similar to a candy cane effect
colours are poured in distinct areas (ex. sucker area of the tentacle one colour, and the body/shaft a different colour; the lower part of the bull one colour, split at the medial ring so the upper part is a different colour)
colours are poured on top of each other, where the top colour is poured first and blends/mixes down into the bottom colour.
choose one colour throughout your item. Some products only allow for one colour, which is indicated by the options on the listing.
What does ‘shore hardness’ mean?
Shore Hardness is a measure of the resistance a material has to indentation. There are different Shore Hardness scales for measuring the hardness of different materials (soft rubbers, rigid plastics, and supersoft gels, for example). These scales were invented so that people can discuss these materials and have a common point of reference.
What shore hardness does Deep Fantasies offer?
Deep Fantasies offers three different firmness options (depending on the toy).
There are different factors to consider when choosing your firmness; such as, how thick the toy is, the height of a toy, your personal preference, etc. Generally, we recommend toys that are small & thin, or tall & thin are done in Medium or Firm. Whereas larger toys are better in Soft or Medium. If a toy is tall/small & thin, and you choose soft, it may not stand well on its own or be floppy. A large toy made in firm could turn out quite hard and dense.
If you have specific questions about what firmness to choose based on the toy you’re purchasing, please feel free to reach out.
(You cannot choose firmness on strokers, egg depositor, or sheaths. For the function of the toy, and the molding process, these are made in softer silicone)
How do you measure the shore hardness?
The different Shore Hardness scales measure the resistance of a material to indentation. A ‘Shore Hardness' gauge (looks like a round tire pressure gauge) has a needle on a spring protruding from one end. The needle is placed against the rubber or plastic and pressure is applied. Once the gauge is pressed firmly against the material and the needle has penetrated as far as it can go, the measurement needle will indicate the corresponding hardness measurement.
In general a batch of silicone rated as a specific hardness will result in that hardness when tested - however, each batch can have slight variance. For example, a current batch that is ‘0050 Medium’, could come out slightly softer, or slightly harder, than a batch we’ve used in the past.
Wash with odourless, non-abrasive soap and warm water, or use a silicone toy cleaner.
Clean before and after every use.
All of our toys are dishwasher safe, and can also be boiled.
Can I request alterations to already listed items?
Absolutely. At our discretion, we can alter any of our toys; height and girth. Custom moulds take a few extra days, and we charge a minimum $100 for the new mould creation.
Do you take custom design requests?
If you do not see a design that fits your needs in our shop, we are open to discussing custom designs with you. If we are able to take on the project, we will charge a minimum $250 design fee to begin the process.
Deep Fantasies Inc. is not responsible for any injury or harm that may be caused by these novelty items, nor can we suggest how they are used once purchased. Please use your best judgment and follow safety precautions.
Refunds, Cancellations, and Returns.
Please See our TERMS OF SERVICE for information on Refunds, Cancellations and Returns.
Cancellations must be requested within 12hrs of purchase. After this ALL SALES ARE FINAL.
What are the toys made from?
At Deep Fantasies we use only 100% Platinum Cure Silicone, from Smooth-On. This ensures it is body safe, hypoallergenic, and has exceptional durability. The liquid and cosmetic mica pigments we use are then mixed and encapsulated in the silicone, rendering it inert, so they will never come in contact with the body.
We at Deep Fantasies Inc. are aware of our customers desire for body safe toys, especially in an unregulated industry. If regulations on sex products develop in the future, or we determine there to be better materials for production, we will of course pivot to provide the best possible items for our valued customers.